Wednesday, 23 September 2015
A quick photo post update today showing the recent progress on the latest ghost town model which started life a couple of weeks back as a pile of small old boxes. The roof was made from the card out of an Amazon box. Now the model is almost complete as far as being covered in coffee sticks to give the wooden structure its required appearance.
Here is the next one, basic shape brought together with the boxes having been tried in various configurations before being settled and glued together. Again a roof made from the rest of the Amazon packaging, note I’ve used the natural bond on their packaging to give a ridge along the top of the building which will be covered in sticks as well. I’ve left one side of the roof open, here I intend to have a hole in the side of the roof as if something has broken out.
And finally an exclusive heads up to blog readers.
The Kindle edition of book 2 of Karl’s trilogy
'Karl - The Lost Adventurer'
will be on special offer Countdown Deal starting October 3rd.
Don’t miss your chance to continue the adventure...
Saturday, 5 September 2015
Aborted support, even sticking strips
together at 90 degrees so that they
supported each other the support
was not rigid enough.
A couple of these had their base shape constructed from foam board; others were made from old boxes.
There were a few issues with some of them during construction which I hope I can address this time round.
The main problem is the weakness of this cardboard to hold up under building, but once they are fully coated with the sticks then they become quite solid. I start by taking the boxes apart and reversing them, so that they are inside out. This turns the shiny sides in, which means when you leave some card bare for the windows it will take the paint better.
It was whilst sitting in contemplation that thanks to an empty loo roll I was reminded of the strength of the humble tube. I tried a couple of ideas to add support to the inside of the boxes before sealing them up, but the tube is the best strengthening idea other than filling them with plaster – but that’s excessive, expensive and too heavy.
With the first of the tubes as support.
The tube was cut down and slid into the box before the end was fitted. Depending on the size of the box you’ll need several of these to support the middle and corners. Toilet roll tubes don't come round that frequently, so other tubes are needed. Some I made by rolling up those annoying flyers that come through the letterbox and what drop out of magazines, glued and taped in a roll then cut to the right length to support the boxes. Other tubes were made from corrugated card from a mail-order delivery. The thing to remember when using this cardboard is to ensure that you cut the card so that the direction of the corrugations is vertical for your tube, if they stand horizontal the tube will collapse under pressure.
New collection of boxes
I put the three boxes together in various patterns before deciding on this configuration. Then started to collect my next set of boxes. I did not expect these to be mainly made up of medicine boxes and ice cream boxes, but with a recent chest and throat infection this became the origin of the next collection.
I used one of the Lemsip boxes collected from the medicinal collection as an additional front entrance to the first of these buildings.
This model doesn’t look like much at the moment, but just wait and see what happens to it.
Previous blog in this series: Rubbish or Raw Material?